Feature:

Small size, light weight
Provide 50-1000V DC and 0.1MΩ-50GΩ application range
Provide 10 groups of memory setting
LCD display,test status, the be clear at a glance
High stable dc voltage output,resistance on the lower limit set, only the police

Provide remote PCLS control interface

Specification:

Output voltage: 50-100V

Voltage precision: ±(1% of setting +1 counts)From no load to full load

Voltage ripple: < 2%

Resistance setting range: 0.1-999.9mΩ, 1000-9999mΩ

The resistance of resolution: 0.1mΩ/1mΩ

Delay time: 1-999.9s

Test time: 0, 0.1-999.9s (0 is continuously)

Resistance measurement accuracy: 0.1-999.9mΩ, ±(2% of reading +2counts); 1GΩ-10GΩ, ±(5% of reading +2counts)

Other specifications:

Memory group: 10groups memory

Peripheral remote control, PLC interface:provide Pass, Fail, Processing Remote

monitoring signal and TEST. STOP contact

Security protection: Short circuit automatically cut off the output, buzzer alarm

Display: LCD display

Size: 280(W)x89(H)x280(D)mm

Parameter	7303		7304
Output cuurent	3.0-30.0 （A）		3.0-40.0 （A）
Output voltage	6V. MAX		8V. MAX
Output frequency	50 or 60 Hz, ±100 ppm
Output waveform	Sine wave, distortion (THD) < 2%, Crest Factor (Crest Factor) = 1.3 – 1.5
Resistance setting range	0-510(mΩ)	0-120(mΩ)		0-600(mΩ)	0-200(mΩ)	0-150(mΩ)
Corresponding current output	3.0-10.0(A)	10.0-30.0(A)		3.0-10.0(A)	10.0-30.0(A)	30.0-40.0(A)
Resistance resolution	1 mΩ
Test time (s)	0, 0.5 – 999.9 (s) (0 = continuous)
Judgement accuracy	±2% of setting +2 counts
Voltage set	0.00-6.00 V		0.00-8.00 V
Test mode	four-wire measurement
Others
Memory	5 groups of memory
Key Lock	To prevent any unauthorized operators arbitrarily changing the parameter
Peripheral remote control, PLC interface	Provide Pass, Fail, Processing remote monitoring signals and the TEST, STOP contact
Protection	Overload, Open circuit automatically cut off the output,light and buzzer alarm
Display	16 × 2 LCD display
Dimension (W×H×D)	280× 89× 370 / 10Kg