| Model | LRS-200-3.3 | LRS-200-5 | LRS-200-12 | LRS-200-15 | LRS-200-24 | LRS-200-36 | LRS-200-48 | |
| Output | DC Voltage | 3.3V | 5V | 12V | 15V | 24V | 36V | 48V |
| Rated Current | 40A | 40A | 17A | 14A | 8.8A | 5.9A | 4.4A | |
| Current Range | 0-40A | 0-40A | 0-17A | 0-14A | 0-8.8A | 0-5.9A | 0-4.4A | |
| Rated Power | 132W | 200W | 204W | 210W | 211.2W | 212.4W | 211.2W | |
| Ripple & Noise | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 200mVp-p | 200mVp-p | |
| Voltage Adj. Range | 2.97-3.6V | 4.5-5.5V | 10.2-13.8V | 13.5-18V | 21.6-28.8V | 32.4-39.6V | 43.2-52.8V | |
| Voltage Tolerance | ±3.0% | ±3.0% | ±1.5% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
| Line Regulation | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
| Load Regulation | ±2.5% | ±2.0% | ±1.0% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
| Setup, Rise Time | 1500ms,50ms/230VAC 1500ms,50ms/115VAC (At full load) | |||||||
| Hold Up Time | 16ms/230VAC 12ms/115VAC (At full load) | |||||||
| Input | Voltage Range | 90-132VAC/180-264VAC (Switch) | ||||||
| Frequency Rage | 47-63Hz | |||||||
| Efficiency | 83.0% | 87.0% | 87.5% | 88.0% | 89.5% | 89.5% | 90.0% | |
| AC Current | 4A/115VAC 2.2A/230VAC | |||||||
| Inrush Current | Cold start: 60A/230VAC 60A/230VAC | |||||||
| Leakage Current | ＜ 2mA/240VAC | |||||||
| Protection | Overload | 110%-140% rated output power | ||||||
| Hiccup mode: recovers automatically after the fault condition is removed | ||||||||
| Over Voltage | 3.8-4.45V | 5.75-6.75V | 13.8-16.2V | 18-21V | 28.8-33.6V | 41.4-46.8V | 55.2-64.8V | |
| Hiccup mode: recovers automatically after the fault condition is removed | ||||||||
| Safety | Standard | CE, ROHS, CCC | ||||||
| Environment | Working Condition | -25～+70℃, 20～90% rated humidity, non-condensing | ||||||
| Storage Condition | -40～+90℃, 10～95% rated humidity | |||||||
| Temp. Coefficient | ±0.03%/℃ (0～50℃) | |||||||
| Vibration Resistant | 10-500HZ 2G 10min/cycle, 60 minutes each for X, Y, Z axes | |||||||
| Dimension | 215*115*30 mm(L*W*H) | |||||||